Viking Access Systems Swing & Slide Gate Openers

The new E-4™ Residential Swing Gate Operator leads the industry in being the best, most cost effective residential linear arm actuator. This new design allows for a maximum gate capacity of 850 lbs/10’ or 550 lbs/16'. Featuring a convenient manual release handle and pre-wiring for an easy and quick installation. It is ready to be powered with low voltage wiring, allowing installation versatility and accuracy. The E-4™ offers a 2 year residential warranty and UL compliance.

The F-1™ Swing Gate Operator, includes the V-Flex control board and a removable power supply box for low voltage wiring. The removable power supply box allows you to run low voltage to the gate operator rather than high voltage which removes the need to trench high voltage wires. This can save the home or business owner thousands in labor and permit costs.. The V-Flex control board provides a LCD display for diagnostics and operator status.

The Viking G-5™, leads the industry in linear actuator swing gate operators. This new design boasts a maximum gate capacity of 2000 lbs and 100% duty cycle operation, making it unlike any other. Featuring a convenient electronic manual release switch and pre-wired for easy and quick installation. The G-5™ is now powered by the V-Flex control board, including a speed control dial and diagnostic LCD display.

The H-10™ Slide Gate Operator features the V-Flex control board with an on-board diagnostics LCD display and a removable power supply box allowing for a low voltage wiring option. The new chassis design provides easy viewing of the controls and integrated post-mount provisions. Featuring a true1 HP motor that increases the gate capacity of up to 2200 lbs.

The K-2™ Residential Slide Gate Operator features the V-Flex control board with on-board diagnostics, LCD display and simple push-button digital limit setup. Featuring a built in heater, increased gate capacity of up to 700 lbs., a 5 Year residential warranty and Viking’s true battery backup system. The power supply features convenient fuse access and LED status indicators for incoming high voltage.

The L-3™ Slide Gate Operator features the V-Flex control board with on-board diagnostics LCD display and a removable power supply box for low voltage wiring. The new chassis design provides easy viewing of the controls and integrated post-mount provisions allowing it to be raised from the ground if needed.

The Q-7™ Slide Gate Operator is equipped with mechanical manual release freeing the gate completely from the gear drive.​ Some of the standard features include: 5 year commercial warranty, UL325 and UL991 compliance, innovative fine tune adjustment for the end of gate travel ( down to 1/8” ), adaptive algorithm with smooth acceleration and deceleration, and more than 1/2 kilowatt of power.

The R-6™ Residential Swing Gate Operator, features the V-Flex control board with on-board diagnostics LCD display and new chassis design providing easy viewing of the controls. The R-6™ is also equipped with a built in heater; an on board temperature management system and allows for an increased gate capacity of up to 700 lbs, making it a great option for heavy ornamental gates.

The T-21™ Swing Gate Operator, has a 1/4" steel chassis with multi-layer corrosion protection. This ensures reliable, long-lasting operation in the harshest of environments at your home or business. Built-in heater with thermostat control, 120/240 VAC operation, Viking’s true battery backup and smooth start / stop operation are all standard features in this operator. This powerful swing gate operator has gate capacity of up to 2000 lbs @ 12 ft.

A true milestone among all gate operators. Although it only requires one 12V battery and one 12V solar panel, the G5 is still a 24VDC motor. This gives you the flexibility of gate length and size for your solar application and allows the G5 a max capacity of 1,000 pounds. Going green has never been easier, weather you are looking for a new opener at your home or ranch, the Viking G5 solar is the best option.

The K-2™ Solar Slide Gate Operator can be used for gates up to 700 lbs and 30 ft long. The controller has its very own power management system to use its solar regulator to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. Homeowners and installers alike have found great success with Viking's solar K-2 model.

The R-6™ Solar Swing Gate Operator is perfect for applications where A/C power is not available or economical. The controller has its very own 12 volt power management system to use its solar regulators to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. The chassis comes with spacious room, enough to fit a 35 amp hour battery without the need to purchase a separate enclosure.